Cabletron Systems 6E132-25 User Manual

 

Introduction

 

, 

 

, describes how to access Local 

Management and use the Local Management screens to manage the 
6E12X-26 and 6E13X-25 interface modules and the 6C105 chassis.

,

 

, contains information on functionality and 

operating specifications, connector pinouts, environmental requirements, 
and physical properties.

 

, 

contains information about FE-100TX pinouts and information 
concerning cable types used with the FE-100FX and FE100-F3. 

,

 

describes how to install optional Fast Ethernet Interface Modules and how 
to set the Mode Switches.

 

The 6E12X-26 and 6E13X-25, shown in 

, are interface 

modules for Cabletron Systems 6C105 SmartSwitch 6000 chassis.

The 6E12X-26 and 6E13X-25 are high-speed network switch devices that 
support 802.1D switching (bridging), 802.1Q switching, and Cabletron 
Systems SecureFast Switching Virtual Network technology. Ports 25 and 
26 of the 6E12X-26 support optional Fast Ethernet Interface Modules and 
can provide uplinks to 100BASE-TX or 100BASE-FX Fast Ethernet 
networks. The 6E13X-25 is capable of being equipped with a High Speed 
Interface Module (HSIM) that provides for additional connectivity to 
other high speed networking technologies such as Asychronous Transfer 
Mode (ATM), Wide Area Networks (WANs) and Fiber Distributed Data 
Interface (FDDI).

The 6E12X-26 and 6E13X-25 can be used to connect individual 
high-bandwidth user devices, such as workstations, and to provide a 
central switching point for multiple Ethernet segments using devices such 
as Cabletron Systems HubSTACK or other third party stackable devices.

 

 displays the 6E122-26 and 6E132-25. The 

6E122-26 and the 6E123-26 are functionally identical, as are 
the 6E132-25 and the 6E133-25. The only difference being that 
the 6E123-26 and 6E133-25 modules support RJ21 front panel 
connections.