Cabletron Systems 6E132-25 User Manual
Chapter 3: Installation
3-6
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide
3.5.1
Connecting UTP Cables to Ports 1 Through 24 of
the 6E122-26 and 6E132-25
the 6E122-26 and 6E132-25
Ports 1 through 24 of the 6E122-26 and 6E132-25 are 10BASE-T ports
with internal crossovers. When connecting a workstation, use a
straight-through cable. When connecting networking devices, such as
another bridge, repeater, or router, use a crossover cable.
with internal crossovers. When connecting a workstation, use a
straight-through cable. When connecting networking devices, such as
another bridge, repeater, or router, use a crossover cable.
Connect a twisted pair segment to the 6E122-26 and 6E132-25 as follows:
1.
Ensure that the device connected to the other end of the segment is
powered ON.
powered ON.
2.
Connect the twisted pair segment to the 6E132-25 or 6E122-26 by
inserting the RJ45 connector on the twisted pair segment into the
desired RJ45 port (Ports 1 through 24) as shown in
inserting the RJ45 connector on the twisted pair segment into the
desired RJ45 port (Ports 1 through 24) as shown in
.
Figure 3-2
6E122-26 and 6E132-25 Twisted Pair Connection
14
13
5
6
7
8
9
10
11
12
15
16
17
18
19
20
21
22
23
24
RX (Receive)
LED
LED
207603