Cabletron Systems 6E132-25 User Manual
Chapter 5: Local Management
5-26
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide
To establish community names, proceed as follows:
1.
Use the arrow keys to highlight the Community Name field adjacent
to the selected access level.
to the selected access level.
2.
Enter the password in the field (maximum 31 characters).
3.
Press ENTER.
4.
Repeat steps 1 through 3 to modify the other community names.
5.
Use the arrow keys to highlight SAVE at the bottom of the screen and
press ENTER. The message “SAVED OK” displays. The community
names are saved to memory and their access modes implemented.
press ENTER. The message “SAVED OK” displays. The community
names are saved to memory and their access modes implemented.
NOTE
All passwords assigned in the 6C105 SNMP Community
Names screen allow access to both 6C105 Local Management
screens, and the Local Management screens of the interface
modules that are installed in the chassis. To configure the
interface module to not allow access to 6C105 Local
Management screens refer to
Names screen allow access to both 6C105 Local Management
screens, and the Local Management screens of the interface
modules that are installed in the chassis. To configure the
interface module to not allow access to 6C105 Local
Management screens refer to