Cabletron Systems 6E132-25 User Manual

Press ENTER to set the system calendar to the date in the input field.

Use the arrow keys to highlight the SAVE command at the bottom of 
the screen and press ENTER.

If the date entered is a valid format, the Event Message Line at the top of 
the screen displays “SAVED OK”. If the entry is not valid, Local 
Management does not alter the current value, but it does refresh the 
Module Date field with the previous value.

To set the module clock, perform the following steps:

Use the arrow keys to highlight the Module Time field.

Enter the time in an 24-hour format, HH:MM:SS.

Press ENTER to set the system clock to the time in the input field.

Use the arrow keys to highlight the SAVE command at the bottom of 
the screen and press ENTER.

If the time entered is a valid format, the Event Message Line at the top of 
the screen displays “SAVED OK”. If the entry is not valid, Local 
Management does not alter the current value and refreshes the Module 
Time field with the previous value.

If the 6C105 chassis has been assigned a chassis time, it is not 
necessary to assign a module time to the 6E12X-26 and 
6E13X-25. All installed modules recognize the chassis time of 
the 6C105.

When entering the time in the system time field, separators 
between hours, minutes, and seconds do not need to be added 
as long as each entry uses two numeric characters. For 
example, to set the time to 6:45

 

A

.

M

., type “064500” in the 

Module Time field.