Cabletron Systems 42T User Manual

2. Press the MicroMMAC-T’s Reset button.

Once the module is reset, use the factory-default settings or enter new 
parameters. The MicroMMAC-T stores these settings in NVRAM 
during normal operation and during power down until the reset switch 
is toggled again.

The MicroMMACs 22T and 24T have unshielded RJ45 lobe ports that 
support UTP cabling. To connect a UTP segment from the MicroMMAC-T 
to a station supporting STP cabling, a Type 3 Media Filter is required. The 
Cabletron Systems TRMF and TRMF-2 are available for this purpose.

The MicroMMACs 42T and 44T have shielded RJ45 lobe ports that 
support STP cabling. Shielded patch cables that adapt a shielded RJ45 to a 
data connector (MIC) are available from Cabletron Systems (PN 
9372057-8). These adapter/patch cables allow connection to an existing 
patch panel equipped with data connectors. The MicroMMAC-T’s 
network lobe port pinouts are shown in Figure 3-9.

Pin 3 (Receive -)   .  .  .  .  .  .  .  .  . to  .  .  .   Green (Transmit -)
Pin 4 (Transmit +) .  .  .  .  .  .  .  .  . to  .  .  .   Orange (Receive +)
Pin 5 (Transmit -)  .  .  .  .  .  .  .  .  . to  .  .  .   Black (Receive -)
Pin 6 (Receive +)  .  .  .  .  .  .  .  .  . to  .  .  .   Blue (Transmit +)

Black

Green

Blue

Orange