Cabletron Systems 42T User Manual

Static System messages (Table 5-2) display MicroMMAC-T configuration 
information. To view them, press and release the Display button 
(Figure 5-1). Press the Display button to scroll through each message. If 
the Display button is not pressed again within ten seconds, the display 
defaults back to the product name. 

IP Address

xxx.xxx.xxx.xxx

Displays current IP address. This can be changed via 
Local Management

MAC Address

xx.xx.xx.xx.xx.xx

Displays Hardware or MAC address

RAM Image

Rev. xx.xx.xx

Displays currently executing image

Boot PROM

Rev. xx.xx.xx

Displays internal Boot PROM version number

Flash Programmed

xx Times

Displays number of times Flash EEPROM has been 
programmed.

COM 1 

Baud Rate xxxxxx

Displays COM 1 Port’s current Baud rate

COM 1 

Function xxxxxx

Displays COM 1 Port’s current function (Local 
Management console, UPS, or SLIP)

COM 2 

Baud Rate xxxxxx

Displays COM 2 Port’s current Baud rate

COM 2 

Function xxxxxx

Displays COM 1 Port’s current function