Konica Minolta 282 User Manual

Overview

Fax Driver

1-5

In order to use this printing system, it must first be set up.

Setup consists of connecting this machine to a computer and installing the 
fax driver onto the computer being used.

!

This manual describes the setup method of network connection only for 
Port9100 that will be installed by the installer, and LPR/Port9100 that will 
be installed by Add Printer Wizard printing.

Connect this machine to a computer.

Make sure the computer is connected to the network.

Specify the IP address of the machine to connect it to the network.

–

For details on IP address and network settings of the machine, refer 
to the User’s Guide [Print Operations].

Depending on the connection method and protocol, change the net-
work settings of this machine.

–

LPR: Enable the LPD settings on the TCP/IP Setting screen.

–

Port9100: Enable the RAW port setting on the TCP/IP Setting 
screen, and specify the RAW port number (default setting is 
“9100”).

–

Windows printing: Enable “Windows printing” on the Windows Set-
ting screen.

–

IPP: Enable IPP print on the IPP Setting screen.

Install the fax driver.

–

Specify the network port of the fax driver according to the connec-
tion method and protocol.