Konica Minolta 282 User Manual

Installing the fax driver

Fax Driver

2-5

If this installer is used, the fax driver can also be installed at same time as the 
necessary printer driver.

The operations vary depending on the connection method, and if connecting 
with Port9100, specify the IP address manually. If connecting with USB, 
specify the machine that is automatically detected.

*

 Before performing the installation in Windows NT 4.0 for this machine to be 

connected directly to the network using the TCP/IP protocol, the Microsoft 
TCP/IP Print Service must be installed on the computer.

Specify the IP address of this machine.

Depending on the connection method and protocol, change the network set-
tings of this machine.
-

Port9100: Enable the RAW port setting on the TCP/IP Setting screen, and 
specify the RAW port number (default setting is “9100”).

-

 IPP: Enable IPP print on the IPP Setting screen.

2

For details on IP address, RAW port number settings and IPP settings of 
this machine, refer to the User’s Guide [Print Operations].

Operating system

Windows NT 4.0 (Service Pack 6a or later)

*

Windows 2000 Professional/Server (Service Pack 3 or later), Win-
dows XP Home Edition/Windows XP Professional, Windows XP 
Professional x64 Edition, Windows Vista Home Basic/Home Pre-
mium/Ultimate/Business/Enterprise, Windows Vista Home Basic/
Home Premium/Ultimate/Business/Enterprise ×64 Edition, Win-
dows Server 2003 Standard Edition, Windows Server 2003 x64 
Edition, Windows Server 2008 Standard/Enterprise, Windows 
Server 2008 Standard/Enterprise x64

Processor

According to the environment recommended for the operating sys-
tem

Memory

Capacity recommended for the operating system
With sufficient memory resources in the operating system and ap-
plication being used