Konica Minolta 282 User Manual

Installing the fax driver

Fax Driver

2-22

After using a USB or parallel cable to connect this machine to a com-
puter, turn on the computer.

–

Do not disconnect or connect the cable while the computer is start-
ing up.

Insert the printer driver CD-ROM (Driver CD-ROM Vol.1 PCL Driver) 
into the computer’s CD-ROM drive.

Turn the main power of this machine on.
The Found New Hardware Wizard dialog box appears.

–

If the Found New Hardware Wizard does not start up, turn the main 
power off, then on again.

–

When turning the power off, then on again, wait at least 10 seconds 
before turning the power on again; otherwise, this machine may not 
function properly. 

Select “Install from a list or specific location (Advanced)”, and then 
click the [Next] button.

–

If the Windows connect to Windows Update dialog box appears, 
select “NO”.

From “Search for the best driver in these locations”, select “Include this 
location in the search”, and then click the [Browse] button.

Specify the desired folder on the CD-ROM that contains the fax driver, 
and then click the [Open] button.

–

Select the specified folder according to the printer driver to be 
used, the operating system, and the language.
Fax driver: “Driver_Fax\Drivers\FAX\Language folder\Win_x86 (for 
a 64-bit operating system, "Win_x64")” folder on the Driver CD-
ROM Vol.1 PCL Driver

Click the [Next] button, and then follow the on-screen instructions.

–

When the Windows logo test and Digital Signature dialog box ap-
pears, click the [Continue Anyway] or [YES] button.

Click the [Finish] button.

When installation is complete, make sure that the icon of the installed 
printer appears in the Printers and Faxes window.