Konica Minolta 282 User Manual

Troubleshooting

Fax Driver

4-3

Perform these troubleshooting procedures if settings cannot be specified in 
the fax driver or if the fax is not sent as specified.

2

Some of the fax driver functions cannot be combined with other func-
tions.

A fax driver setting cannot be 
selected.

Some functions cannot be 
combined.

Do not try to select settings 
that are not available.

The “Conflicts” message with 
“Unable to Select” or “Func-
tion Canceled” appears.

An incorrect combination of 
functions has been specified.

Check the settings and speci-
fy the functions correctly.

The fax is not sent as speci-
fied.

Incorrect settings are speci-
fied.

Check each setting in the fax 
driver.

A combination of functions, 
although possible in the fax 
driver, is not possible with this 
machine.

The paper size, orientation, 
and other settings specified in 
the application have priority 
over those specified in the fax 
driver.

Enter the correct settings in 
the application.

The watermark cannot be at-
tached.

The watermark is not correctly 
set.

Check the watermark set-
tings.

The watermark density is set 
to a level that is too low.

Check the density settings.

Watermarks cannot be out-
puted in graphics applica-
tions.

No watermark can be output-
ed in this case.

Cannot connect to the network.

A connection to the network could not be established.
Check if the network cable is correctly connected. In addi-
tion, check that the Network Settings parameter have been 
correctly specified.