Kingston Technology KNE24TX/RS User Manual
2 Introduction
Kingston Technology Company
KNE24TX/RS User’s Guide - Rev. A01
Intended Audience: This manual assumes that the user has a general working
knowledge of networking principles and its architecture.
knowledge of networking principles and its architecture.
Congratulations on the purchase of your Kingston Fast EtheRx Stackable
100BASE-TX 19” Rack-Mountable Fast Ethernet Hub. There are three models
available: KNE8TX/RS, KNE12TX/RS, and KNE24TX/RS, 8-Port, 12-Port,
and 24-Port Fast Ethernet hubs, respectively. The Fast EtheRx models are
100BASE-TX Class
100BASE-TX 19” Rack-Mountable Fast Ethernet Hub. There are three models
available: KNE8TX/RS, KNE12TX/RS, and KNE24TX/RS, 8-Port, 12-Port,
and 24-Port Fast Ethernet hubs, respectively. The Fast EtheRx models are
100BASE-TX Class
I
and Class
II
compliant repeaters which conform to
IEEE 802.3u 100Mb/s CSMA/CD (Carrier Sense Multiple Access with
Collision Detection) networks using Category 5 Unshielded Twisted Pair
(UTP) cabling. There is also an optional 100BASE-FX plug-in module
available for either SC or ST-type connectors. The Fast EtheRx 100BASE-TX
hubs operate at 100Megabits per second (Mbp/s) out-performing standard
10BASE-T Ethernet 10Mb/s operation by up to 10 times faster.
Collision Detection) networks using Category 5 Unshielded Twisted Pair
(UTP) cabling. There is also an optional 100BASE-FX plug-in module
available for either SC or ST-type connectors. The Fast EtheRx 100BASE-TX
hubs operate at 100Megabits per second (Mbp/s) out-performing standard
10BASE-T Ethernet 10Mb/s operation by up to 10 times faster.
The Fast EtheRx hubs offer eight (8), twelve (12), or twenty-four (24) UTP
ports for 100BASE-TX Fast Ethernet connections. The last UTP port offers
two RJ-45 connectors to support both crossover or straight-through cable wiring
for uplinking to one other 100BASE-TX Class
ports for 100BASE-TX Fast Ethernet connections. The last UTP port offers
two RJ-45 connectors to support both crossover or straight-through cable wiring
for uplinking to one other 100BASE-TX Class
II
repeater. The Fast EtheRx
hubs can also be stacked (using any combination of these 3 models) up to six
hubs using the stacking cable provided. This allows a maximum of 48, 72, or
144 UTP ports (depending on the model) on a single collision domain. The
Fast EtheRx hubs can be used on desktop or 19-inch rack-mount installations
(mounting hardware included). For easy trouble-shooting, the front panel
includes a variety of diagnostic LEDs including: Power, Collision, Utilization
and UTP port LEDs which display Link, Activity and Partition/Error status.
hubs using the stacking cable provided. This allows a maximum of 48, 72, or
144 UTP ports (depending on the model) on a single collision domain. The
Fast EtheRx hubs can be used on desktop or 19-inch rack-mount installations
(mounting hardware included). For easy trouble-shooting, the front panel
includes a variety of diagnostic LEDs including: Power, Collision, Utilization
and UTP port LEDs which display Link, Activity and Partition/Error status.
For the remainder of this manual, the Fast EtheRx Stackable Fast Ethernet
Hubs will be referred to collectively as the Fast EtheRx Hubs. For clarity, the
three models will be differentiated as follows:
Hubs will be referred to collectively as the Fast EtheRx Hubs. For clarity, the
three models will be differentiated as follows:
KNE8TX/RS – Fast EtheRx Stackable 8-Port Fast Ethernet hub
KNE12TX/RS – Fast EtheRx Stackable 12-Port Fast Ethernet hub
KNE24TX/RS – Fast EtheRx Stackable 24-Port Fast Ethernet hub
Order Information