Lantronix XSENSO 21A2 User Manual

Page of 125
17: Maintenance and Diagnostics Settings
xSenso User Guide
95
ICMP Settings
Table 17-5  ICMP Network Stack Settings
To Configure ICMP Network Stack Settings
Using Web Manager
To configure ICMP protocol settings, go to the Admin tab/page,
 
click Protocol Stack in the 
menu and select ICMP.
Using the CLI
To enter the command level:  enable -> config -> icmp
Using XML
Include in your file:  <configgroup name=”icmp”>
ARP Settings
Table 17-6  ARP Network Stack Settings
To Configure ARP Network Stack Settings
Using Web Manager
To configure ARP protocol settings, go to the Admin tab/page,
 
click Protocol Stack in the 
menu and select ARP.
Using the CLI
To enter the command level:  enable -> config -> arp
Protocol Stack
ICMP Settings
Description
State
The State selection is used to turn on/off processing of ICMP messages. 
This includes both incoming and outgoing messages.  Choose Enabled or 
Disabled.
Protocol Stack
ARP Settings
Description
IP Address
Enter the IP address to add to the ARP cache.
MAC Address
Enter the MAC address to add to the ARP cache.
Remove
Click the Remove link beside a specific address to remove it.
Remove All
Click the Remove All link underneath all listed addresses to remove all the 
addresses.