Kingston Technology 2000 User Manual
35
Chapter 5
Rack Mounting
This chapter describes two methods you can use to mount your Switch into a
chassis rack.
chassis rack.
•
Rack-mount brackets for use with a two-post rack (page 36).
•
Sliding rails for use with a four-post rack (optional purchase).
Following are standard rack-mounting considerations that Bay Networks
recommends you follow:
recommends you follow:
•
The maximum recommended ambient temperature is 40 degrees
Centigrade. Additionally, make sure the internal temperature of the
rack does not exceed 40 degrees.
Centigrade. Additionally, make sure the internal temperature of the
rack does not exceed 40 degrees.
•
Do not block the power supply vents or otherwise restrict airflow
when installing the Switch into a rack.
when installing the Switch into a rack.
•
Make sure that your rack is properly stabilized so that it will not tip
over under the weight of the Switch and other devices.
over under the weight of the Switch and other devices.
•
Make sure that the electrical branch circuits are capable of handling
the Switch and other units in the rack before installing and
powering up the Switch.
the Switch and other units in the rack before installing and
powering up the Switch.
•
Ensure that a reliable Earthing path is maintained in the rack
system. The Switch is intended to be connected to an Earth ground.
system. The Switch is intended to be connected to an Earth ground.