IronPort Systems ES-1528 User Manual

 Chapter 18 SNMP

ES-1528 User’s Guide

The following table describes the labels in this screen. 

SNMP traps are used to send out SNMP notifications of urgent or normal events in the system 
to external management stations. Use the SNMP Trap Station screen to enable the sending of 
SNMP traps to a remote SNMP management station(s). Click SNMP > Trap Station to view 
the screen as shown.

Figure 69   SNMP Trap Station 

The following table describes the labels in this screen. 

Table 49   SNMP Notification 

Enable SNMP 

Notification

Select this to enable the sending of SNMP traps to a remote SNMP management 

station.

Enable 

Authentication 

Notification

Select this to enable logging of failed authentication attempts.

Apply

Click this to save your settings to the switch.

Table 50   SNMP Trap Station 

Trap Station ID

Select the SNMP trap station you want to edit.

Create New 

Trap Station

Click this to configure a new SNMP Trap Station.

Trap Station ID

This field indicates the trap station number. It is used for identification only. Click on 

the individual trap station number to edit the trap station settings.

Remote IP 

Address

This field displays the IP address of the remote SNMP management station.