Cisco Systems WSC2960S24TSSRF User Manual
1-20
Catalyst 2960-S Switch Hardware Installation Guide
OL-19732-04
Chapter 1 Product Overview
Management Options
The Cisco RPS 2300 has two output levels: –52 V and 12 V with a total maximum output power of
2300 W.
2300 W.
All supported and connected switches can simultaneously communicate with the RPS 2300. You can
configure these RPS 2300 features through the switch software:
configure these RPS 2300 features through the switch software:
•
Enable RPS active or standby mode for each connected switch
•
Configure switch priority for RPS support
•
List the connected switches and the power-supply module sizes
•
Obtain reports when a switch is powered by the RPS
•
Obtain status reports for the RPS power-supply module
•
Read and monitor backup, failure, and exception history
AC Power Connector
The switch is powered through the internal power supply. The internal power supply is an autoranging
unit that supports input voltages between 100 and 240 VAC. Use the supplied AC power cord to plug it
into an AC power outlet.
unit that supports input voltages between 100 and 240 VAC. Use the supplied AC power cord to plug it
into an AC power outlet.
Management Options
•
Cisco Network Assistant
Cisco Network Assistant is a PC-based network management GUI application for LANs of small
and medium-sized businesses. You can use the GUI to configure and manage switch clusters or
standalone switches. Cisco Network Assistant is available at no cost and can be downloaded from
this URL:
and medium-sized businesses. You can use the GUI to configure and manage switch clusters or
standalone switches. Cisco Network Assistant is available at no cost and can be downloaded from
this URL:
For information on starting the Network Assistant application, see the Getting Started with Cisco
Network Assistant guide on Cisco.com.
Network Assistant guide on Cisco.com.
•
Device manager
You can use the device manager in the switch memory to manage individual and standalone
switches. This web interface provides configuration and monitoring from anywhere in your network.
For information, see the switch getting started guide and the device manager online help.
switches. This web interface provides configuration and monitoring from anywhere in your network.
For information, see the switch getting started guide and the device manager online help.
•
Cisco IOS CLI
You can configure and monitor the switch and switch cluster members from the CLI. Access the CLI
by connecting your management station to the switch console port or by using Telnet from a remote
management station. See the switch command reference on Cisco.com for information.
by connecting your management station to the switch console port or by using Telnet from a remote
management station. See the switch command reference on Cisco.com for information.
•
CiscoWorks application
The CiscoWorks LAN Management Solution (LMS) is a suite of management tools that simplify the
configuration, administration, monitoring, and troubleshooting of Cisco networks. See the LMS
documentation for information:
configuration, administration, monitoring, and troubleshooting of Cisco networks. See the LMS
documentation for information:
http://cisco.com/go/lms