Cisco Systems SRW248G4PK9NA User Manual

Viewing TCAM Utilization[

17

Cisco Small Business 300 Series Managed Switch Administration Guide 

•

Invalid EAPOL Frames Received—Unrecognized EAPOL frames received 
on this port.

•

EAP Length Error Frames Received—EAPOL frames with an invalid Packet 
Body Length received on this port.

•

Last EAPOL Frame Version—Protocol version number attached to the most 
recently received EAPOL frame.

•

Last EAPOL Frame Source—Source MAC address attached to the most 
recently received EAPOL frame.

To clear statistics counters:

•

Click Clear Interface Counters to clear the selected interfaces counters.

•

Click Clear All Interface Counters to clear the counters of all interfaces.

The device architecture uses a TCAM (Ternary Content Addressable Memory) to 
support packet actions in wire speed.

TCAM holds the rules produced by applications, such as ACLs (Access Control 
Lists), Quality of Service (QoS), IP Routing and user-created rules. The maximum 
number of TCAM rules that can be allocated by all applications on the device is 
512.

Some applications allocate rules upon their initiation. Additionally, processes that 
initialize during system boot use some of their rules during the startup process.

To view TCAM utilization, click Status and Statistics > TCAM Utilization.

The TCAM Utilization page shows the following fields:

•

Maximum TCAM Entries for IPv4 and Non-IP (Rules)—Maximum TCAM 
Entries available.

•

-

In Use—Number of TCAM entries used for IPv4 routing.

-

Maximum—Number of available TCAM entries that can be used for IPv4 
routing.