Cisco Systems SRW248G4PK9NA User Manual
Security
Configuring TCP/UDP Services
Cisco Small Business 300 Series Managed Switch Administration Guide
324
17
Configuring TCP/UDP Services
The TCP/UDP Services page enables TCP or UDP-based services on the device,
usually for security reasons.
usually for security reasons.
The device offers the following TCP/UDP services:
•
HTTP—Enabled by factory default
•
HTTPS—Enabled by factory default
•
SNMP—Disabled by factory default
•
Telnet—Disabled by factory default
•
SSH—Disabled by factory default
The active TCP connections are also displayed in this window.
To configure TCP/UDP services:
STEP 1
Click Security > TCP/UDP Services.
STEP 2
Enable or disable the following TCP/UDP services on the displayed services.
•
HTTP Service—Indicates whether the HTTP service is enabled or disabled.
•
HTTPS Service—Indicates whether the HTTPS service is enabled or
disabled.
disabled.
•
SNMP Service—Indicates whether the SNMP service is enabled or
disabled.
disabled.
•
Telnet Service—Indicates whether the Telnet service is enabled or disabled.
•
SSH Service—Indicates whether the SSH server service is enabled or
disabled.
disabled.
The TCP Service Table displays the following fields for each service:
•
Service Name—Access method through which the device is offering the
TCP service.
TCP service.
•
Type—IP protocol the service uses.
•
Local IP Address—Local IP address through which the device is offering
the service.
the service.
•
Local Port—Local TCP port through which the device is offering the service.