Pelco C1528M-F User Manual

80

C1528M-F (6/05)

In addition to any programming needed for the devices connected to the CM6800E-48X8 (such as camera control and monitor settings), you must 
configure the following CM6800E satellite settings.

•

Monitor Access: Change the appropriate monitor access to TIE LINE

•

Port: Change the Port 7 device setting to SATELLITE

•

Alarms (optional): Enable the appropriate internal and external alarm contacts, and then set them to report to the CM740/CM9760 system.

Satellite programming instructions are provided in the following sections. Refer to the Programming section for basic CM6800E programming 
instructions.

Once the CM6800E programming is complete, then you must configure the CM6800E-48X8 as a satellite device within the 9700 System 
configuration files. If you are using the CM9700-MGR System Manager software, refer to the Configure CM9700-MGR System Manager Settings 
section. If you are using the CM9760-MGR System Manager software, refer to the Configure CM9760-MGR System Manager Settings section.

Change the setting to TIE LINE for each monitor output connected to the 9700 System matrix bay, as shown below. Note that you must use the 
CM6800E-48X8 monitor outputs in sequential order, starting with monitor output 1.

NOTE:  You cannot change the access setting of the monitor you are currently viewing.

Figure 54.  Set Satellite Access

PELCO SWITCHER

MODEL CM6800E

MAIN MENU

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

CAMERA

LOGICAL CAMERA

MONITOR

ACCESS

TIME & DATE

PORT

PRIORITY

SEQUENCE

MACRO

ALARM CONTACTS

EVENT TIMER

SET AUXILIARY

SET PASSWORD

SYSTEM

ABOUT CM6800E

ENGLISH

RETURN

      ACCESS

1    KEYBOARD TO MONITOR
2    CAMERA TO KEYBOARD
3    CAMERA TO MONITOR
4    SATELLITE VIEW

                 RETURN

SATELLITE VIEW

 

MON

1
2
3
4
5
6
7
8

 

RETURN

 

 
TIE LINES

 

TIE LINES
TIE LINES
TIE LINES
TIE LINES
TIE LINES
TIE LINES
LOCAL

VIEW