Pelco 100BASE-TX User Manual
26
C2607M (2/07)
Troubleshooting
LED indicators on the front and rear panels of the FX82052 module allow you to monitor operational
status:
status:
•
LED indicators on the front panel allow you to monitor operating power, fiber redundancy
mode status, 100BASE-FX port status, and optic signal/laser status. Refer to Table C for
information about the front-panel indicators and associated troubleshooting guidelines.
mode status, 100BASE-FX port status, and optic signal/laser status. Refer to Table C for
information about the front-panel indicators and associated troubleshooting guidelines.
•
LED indicators on the rear panel allow you to monitor RJ-45 10BASE-T/100BASE-TX port
status. Refer to Table D for information about the rear-panel indicators and associated
troubleshooting guidelines.
status. Refer to Table D for information about the rear-panel indicators and associated
troubleshooting guidelines.
Table C. Troubleshooting with Front-Panel Indicators
Indicator Color
Meaning
Possible Cause
Corrective Action
Power LED (Pelco badge)
Blue
Power is being
applied to the
module.
applied to the
module.
–
No action required.
Not lit
Power is not being
applied to the
module.
applied to the
module.
Power connection is faulty.
Check power connection.
If module is rack mounted,
reseat module or power
supply as necessary.
If module is rack mounted,
reseat module or power
supply as necessary.
Power supply has failed.
Replace power supply.
Loss of power occurs due to
tripped circuit breakers,
blown fuses, or faulty
electrical service.
tripped circuit breakers,
blown fuses, or faulty
electrical service.
Check circuit breakers, fuses,
or electrical service as
necessary.
or electrical service as
necessary.
(Continued on next page)