Pelco c1515m-a User Manual

Pelco Manual C1515M-A (11/01)

25

To connect a single ALM2064 Alarm Interface Unit:

1.

Connect the ALM2064 OUT port to COM 3 on the CM6800 using the 6-foot (1.8 m)
straight data cable supplied with the CM6800.

2.

Set SW2, DIP switches 1-8 to the appropriate positions for the local address (default
address setting is 1). Refer to the ALM2064 Alarm Interface Unit Installation/Operation
Manual for instructions.

00608

Figure 17.  Connecting a Single ALM2064 Alarm Interface Unit