Pelco c1515m-a User Manual

58

Pelco Manual C1515M-A (11/01)

Use the Set Password screen to change the system password.

If you change the password and then forget the new one, you will have to reset the system
to the factory defaults. All system programming will be lost. Pelco recommends uploading
your programming settings to the CM6800-MGR before changing the password. This allows
you to download the previous system settings, in the event of a system reset. If necessary,
refer to the 

Troubleshooting 

section for the system reset procedure.

Figure 46.  Access the Set Password Screen

OLD PASSWORD:

Enter the current password (Default: 2899100). If you make a mistake
entering the old password, the message “WRONG OLD PASSWORD.
TRY AGAIN!” appears. Re-enter the old password correctly.

NEW PASSWORD:

Using the numerical keypad, enter the new password. The password
must be seven digits.

VER PASSWORD:

Enter the new password again as a verification check. If you make a
mistake entering the verification password, the message “VERIFIED
PASSWORD DOESN’T MATCH” appears. Re-enter the verification
password correctly.

Once the new password is accepted, the Main Menu appears.

PELCO SWITCHER

MODEL CM6800

MAIN MENU

1

CAMERA

2

LOGICAL CAMERA

3

MONITOR

4

ACCESS

5

TIME & DATE

6

PORT

7

PRIORITY

8

SEQUENCE

9

MACRO

10

ALARM CONTACTS

11

EVENT TIMER

12

SET AUXILIARY

13

SET PASSWORD

14

ABOUT CM6800

ENGLISH

RETURN

00654

SET PASSWORD

OLD PASSWORD:

*******

NEW PASSWORD: *******
VER PASSWORD:

*******

RETURN

00656