DELL S6000-ON User Manual
The output of show IPv6 cam command has been enhanced to include the ECMP field in the Neighbor
table of Ipv6 CAM. The sample output is displayed as follows, which is similar to the prefix table.
table of Ipv6 CAM. The sample output is displayed as follows, which is similar to the prefix table.
The following is the portion of the example output:
Neighbor Mac-Addr
Port VId
------------------------------------- -----------------
--------- ----
[ 132] 20::1 00:00:20:d5:ec:a0 Fo
1/4 0
The following is the portion of the example output from Release 9.3(0.1):
Neighbor Mac-Addr Port Vid EC
------------------------------------- -------------------------
[ 132] 20::1 00:00:20:d5:ec:a0 Fo 1/4 0 1
[ 132] 20::1 00:00:20:d5:ec:a1 Fo 1/8 0 1
Support for moving /128 IPv6 Prefixes and /32 IPv4 Prefixes
The software supports a command to program IPv6 /128 route prefixes in the route table. You can define
IPv6 /128 route prefixes in the route table using the ipv6 unicast-host-routecommand. You can
also define IPv4 /32 route prefixes in the host table using the ipv4 unicast-host-routecommand.
324
Equal Cost Multi-Path (ECMP)