DELL S6000-ON User Manual

  1     2    absent               absent      0

--  Fan  Status  --

Unit Bay   TrayStatus  Fan0    Speed

--------------------------------------------------------------------------------

----

 1    1     up          up      9900

 1    2     up          up      9900

 1    3     up          up      9900

Speed in RPM

The display command displays additional configuration information.

The no-more command displays the output all at once rather than one screen at a time. This is similar to 
the terminal length command except that the no-more option affects the output of the specified 
command only.

The save command copies the output to a file for future reference.

NOTE: You can filter a single command output multiple times. The save option must be the last 
option entered. For example: Dell# command | grep regular-expression | except 
regular-expression | grep other-regular-expression | find regular-expression 
| save.

Multiple Users in Configuration Mode

Dell Networking OS notifies all users when there are multiple users logged in to CONFIGURATION mode.

A warning message indicates the username, type of connection (console or VTY), and in the case of a VTY 
connection, the IP address of the terminal on which the connection was established. For example:

• On the system that telnets into the switch, this message appears:

% Warning: The following users are currently configuring the system:

User "<username>" on line console0

• On the system that is connected over the console, this message appears:

% Warning: User "<username>" on line vty0 "10.11.130.2" is in configuration 

mode

If either of these messages appears, Dell Networking recommends coordinating with the users listed in 
the message so that you do not unintentionally overwrite each other’s configuration changes.

46

Configuration Fundamentals