DELL S6000-ON User Manual

• snmp-server group access-list-name ipv6

Showing IPv6 Information

View specific IPv6 configuration with the following commands.

• List the IPv6 show options.

EXEC mode or EXEC Privileged mode

show ipv6 ?

Example of show ipv6 Command Options

Dell#show ipv6 ?

accounting   IPv6 accounting information

cam          IPv6 CAM Entries

fib          IPv6 FIB Entries

interface    IPv6 interface information

mbgproutes   MBGP routing table

mld          MLD information

mroute       IPv6 multicast-routing table

neighbors    IPv6 neighbor information

ospf         OSPF information

pim          PIM V6 information

prefix-list  List IPv6 prefix lists

route        IPv6 routing information

rpf          RPF table

Dell#

Showing an IPv6 Interface

To view the IPv6 configuration for a specific interface, use the following command.

• Show the currently running configuration for the specified interface.

EXEC mode

show ipv6 interface interface {slot/port/subport}

Enter the keyword interface then the type of interface and slot/port information:
– For all brief summary of IPv6 status and configuration, enter the keyword brief.
– For all IPv6 configured interfaces, enter the keyword configured.
– For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port/

subport information.

– For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE then the slot/port information.
– For a Loopback interface, enter the keyword loopback then a number from 0 to 16383.
– For a port channel interface, enter the keywords port-channel then a number.
– For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.

Example of the show ipv6 interface Command
Dell#show ipv6 int ManagementEthernet 1/1

ManagementEthernet 1/1 is up, line protocol is up

  IPV6 is enabled

  Stateless address autoconfiguration is enabled

IPv6 Routing

467