DELL S6000-ON User Manual

Remote Port ID: TeGigabitEthernet 2/11/1

Local Port ID: TeGigabitEthernet 1/21/1

Locally assigned remote Neighbor Index: 4

Remote TTL: 120

Information valid for next 120 seconds

Time since last information change of this neighbor: 01:50:16

Remote MTU: 1554

Remote System Desc: Dell Networks Real Time Operating System Software

Dell Operating System Version: 1.0.

Build Time: Thu Aug 9 01:05:51 PDT 1999-2014

Existing System Capabilities: Repeater Bridge Router

Enabled System Capabilities: Repeater Bridge Router

Remote Port Vlan ID: 1

Port and Protocol Vlan ID: 1, Capability: Supported, Status: Enabled

---------------------------------------------------------------------------

========================================================================

Configuring LLDPDU Intervals

LLDPDUs are transmitted periodically; the default interval is 30 seconds.
To configure LLDPDU intervals, use the following command.

• Configure a non-default transmit interval.

CONFIGURATION mode or INTERFACE mode

hello

Example of Viewing LLDPDU Intervals

R1(conf)#protocol lldp

R1(conf-lldp)#show config

protocol lldp

advertise dot1-tlv port-protocol-vlan-id port-vlan-id

advertise dot3-tlv max-frame-size

advertise management-tlv system-capabilities system-description

no disable

R1(conf-lldp)#mode ?

rx Rx only

tx Tx only

R1(conf-lldp)#mode tx

R1(conf-lldp)#show config

protocol lldp

advertise dot1-tlv port-protocol-vlan-id port-vlan-id

advertise dot3-tlv max-frame-size

advertise management-tlv system-capabilities system-description

mode tx

no disable

R1(conf-lldp)#no mode

R1(conf-lldp)#show config

protocol lldp

advertise dot1-tlv port-protocol-vlan-id port-vlan-id

advertise dot3-tlv max-frame-size

advertise management-tlv system-capabilities system-description

Link Layer Discovery Protocol (LLDP)

557