DELL S6000-ON User Manual

- - - network rw ftp:

- - - network rw tftp:

- - - network rw scp:

You can change the default file system so that file management commands apply to a particular device
or memory.

To change the default directory, use the following command.

• Change the default directory.

EXEC Privilege mode

cd directory

View Command History

The command-history trace feature captures all commands entered by all users of the system with a time

stamp and writes these messages to a dedicated trace log buffer.

The system generates a trace message for each executed command. No password information is saved
to the file.

To view the command-history trace, use the show command-history command.

Example of the show command-history Command
Dell#show command-history

[12/5 10:57:8]: CMD-(CLI):service password-encryption

[12/5 10:57:12]: CMD-(CLI):hostname Force10

[12/5 10:57:12]: CMD-(CLI):ip telnet server enable

[12/5 10:57:12]: CMD-(CLI):line console 0

[12/5 10:57:12]: CMD-(CLI):line vty 0 9

[12/5 10:57:13]: CMD-(CLI):boot system rpm0 primary flash://FTOS-

CB-1.1.1.2E2.bin

Upgrading Dell Networking OS

NOTE: To upgrade Dell Networking Operating System (OS), refer to the Release Notes for the

version you want to load on the system.

Using HTTP for File Transfers

Stating with Release 9.3(0.1), you can use HTTP to copy files or configuration details to a remote server.
Use the copy source-file-url http://host[:port]/file-path command to transfer files to an external server.
Enter the following source-file-url keywords and information:

• To copy a file from the internal FLASH, enter flash:// followed by the filename.
• To copy the running configuration, enter the keyword running-config.
• To copy the startup configuration, enter the keyword startup-config.

Getting Started