Manualsbrain.com
  1. Manuals
  2. Brands
  3. DELL
  4. S6000-ON
  5. User Manual

DELL S6000-ON User Manual

Download
Page of 1100
Configure PIM-SMM
Configuring PIM-SSM is a two-step process.
1.
Configure PIM-SMM.
2.
Enable PIM-SSM for a range of addresses.
Related Configuration Tasks
•
Enabling PIM-SSM
To enable PIM-SSM, follow these steps.
1.
Create an ACL that uses permit rules to specify what range of addresses should use SSM.
CONFIGURATION mode
ip access-list standard name
2. Enter the ip pim ssm-range command and specify the ACL you created.
CONFIGURATION mode
ip pim ssm-range acl-name
Enabling PIM-SSM
To display address ranges in the PIM-SSM range, use the show ip pim ssm-range command from 
EXEC Privilege mode.
R1(conf)#do show run pim
!
ip pim rp-address 10.11.12.2 group-address 224.0.0.0/4
ip pim ssm-range ssm
R1(conf)#do show run acl
!
ip access-list standard ssm
  seq 5 permit host 239.0.0.2
R1(conf)#do show ip pim ssm-range
Group Address  / MaskLen
239.0.0.2      / 32
Use PIM-SSM with IGMP Version 2 Hosts
PIM-SSM requires receivers that support IGMP version 3. You can employ PIM-SSM even when receivers 
support only IGMP version 1 or version 2 by translating (*,G) entries to (S,G) entries.
Translate (*,G) entries to (S,G) entries using the ip igmp ssm-map acl command source from 
CONFIGURATION mode. In a standard access list, specify the groups or the group ranges that you want 
to map to a source. Then, specify the multicast source.
696
PIM Source-Specific Mode (PIM-SSM)