Manualsbrain.com
  1. Manuals
  2. Brands
  3. DELL
  4. S6000-ON
  5. User Manual

DELL S6000-ON User Manual

Download
Page of 1100
Configure VLAN Stacking
Configuring VLAN-Stacking is a three-step process.
1.
2.
Assign access and trunk ports to a VLAN (
).
3.
Related Configuration Tasks
•
•
•
•
Creating Access and Trunk Ports
To create access and trunk ports, use the following commands.
• Access port — a port on the service provider edge that directly connects to the customer. An access 
port may belong to only one service provider VLAN.
• Trunk port — a port on a service provider bridge that connects to another service provider bridge and 
is a member of multiple service provider VLANs.
Physical ports and port-channels can be access or trunk ports.
1.
Assign the role of access port to a Layer 2 port on a provider bridge that is connected to a customer.
INTERFACE mode
vlan-stack access
2. Assign the role of trunk port to a Layer 2 port on a provider bridge that is connected to another 
provider bridge.
INTERFACE mode
vlan-stack trunk
3. Assign all access ports and trunk ports to service provider VLANs.
INTERFACE VLAN mode
member
Example of Displaying the VLAN-Stack Configuration for a Switchport
To display the VLAN-Stacking configuration for a switchport, use the show config command from 
INTERFACE mode.
Dell#show run interface tengigabitEthernet 1/1/1
!
interface TenGigabitEthernet 1/1/1
  no ip address
  switchport
  vlan-stack access
  no shutdown
Service Provider Bridging
841