Manualsbrain.com
  1. Manuals
  2. Brands
  3. DELL
  4. S6000-ON
  5. User Manual

DELL S6000-ON User Manual

Download
Page of 1100
  peer-link port-channel 1
  back-up destination 10.11.206.43
Dell-4#
Dell-4#show running-config interface managementethernet 1/1
ip address 10.11.206.58/16
  no shutdown
Configure the VLT links between VLT peer 1 and VLT peer 2 to the Top of Rack unit. In the following 
example, port Te 1/4/1 in VLT peer 1 is connected to Te 1/8/1 of TOR and port Te 1/18/1 in VLT peer 2 is 
connected to Te 1/30/1 of TOR.
1.
Configure the static LAG/LACP between the ports connected from VLT peer 1 and VLT peer 2 to the 
Top of Rack unit.
2.
Configure the VLT peer link port channel id in VLT peer 1 and VLT peer 2.
3.
In the Top of Rack unit, configure LACP in the physical ports (shown for VLT peer 1 only. Repeat 
steps for VLT peer 2. The bold vlt-peer-lag port-channel 2 indicates that port-channel 2 is 
the port-channel id configured in VLT peer 2).
Dell-2#show running-config interface tengigabitethernet 1/4/1
!
interface TenGigabitEthernet 1/4/1
  no ip address
!
  port-channel-protocol LACP
    port-channel 2 mode active
  no shutdown
configuring VLT peer lag in VLT
Dell-2#show running-config interface port-channel 2
!
interface Port-channel 2
  no ip address
  switchport
  vlt-peer-lag port-channel 2
  no shutdown
Dell-2#show interfaces port-channel 2 brief
Codes: L - LACP Port-channel
   LAG  Mode  Status  Uptime    Ports
L  2    L2L3  up      03:33:14  Te 1/4/1 (Up)
In the ToR unit, configure LACP on the physical ports.
s60-1#show running-config interface tengigabitethernet 1/8/1
!
interface TenGigabitEthernet 1/8/1
  no ip address
!
  port-channel-protocol LACP
    port-channel 100 mode active
  no shutdown
s60-1#show running-config interface tengigabitethernet 1/30/1
!
interface TenGigabitEthernet 1/30/1
no ip address
!
  port-channel-protocol LACP
    port-channel 100 mode active
970
Virtual Link Trunking (VLT)