DELL PC6224F User Manual

Configuration and Image File Commands

Use the copy running-config startup-config command to copy the running 

configuration to the startup configuration. 

Use the copy running-config backup-config command to back up the 

running configuration to the backup configuration file. Use the copy startup-

config backup-config command to back up the startup configuration to the 

backup configuration file. 

The copy command can be used to copy an image to another unit. This 

means that a copy command allows the management node to distribute its 

existing code to other nodes. The command syntax is copy image unit {all | 

<1-12>} 

  NOTE: The copy command can accept the unit {all | <1-12>} only as the destination-

url. In this case, only image can be the source-url. 

  NOTE: The copy image unit all command does not copy the active image to the 

backup image on the management unit, just the stack units.

The copy command cannot: 

• Either download code from tftp, for example, to the stack units directly, or
• Copy code from one stack unit to another stack unit.

For copying to all units simultaneously, use the keyword all.

copy scp://user@serverip/PC6200v3.0.0.13.stk image

Remote Password:******

Use the delete backup-config command in Privileged EXEC mode to delete 

the backup-config file.