Manualsbrain.com
  1. Manuals
  2. Brands
  3. DELL
  4. PC6224F
  5. User Manual

DELL PC6224F User Manual

Download
Page of 1356
Power Over Ethernet Commands
1161
power inline traps 
The power inline traps command enables inline power traps. To disable 
inline power traps, use the no form of this command.
Syntax Description
power inline traps 
enable
no power inline traps 
enable
•
enable — Enables traps on the specified unit.
Command Mode
Global Configuration.
Usage Guidelines
No specific guidelines.
Default Value
disable
Examples
console(config)# power inline traps enable
power inline usage-threshold
The power inline usage-threshold command configures the system power 
usage threshold level at which a trap is generated. The threshold is configured 
as a percentage of the total available system power. As specified in the 
Serial 
Communication Manual for PD63000 from PowerDSine, 06-0032-056 UG-
PD63000 Serial Communication Protocol v5 2, Section 4.5.8, the power limit 
beyond which lower priority ports are disconnected has the configurable range 
from 37W to 806W. The maximum available system power for the 6224P and 
6248P are 370W and 350W respectively. 37W is approximately 11 percent of 
these values. Thus, the minimum value of the usage-threshold can be 
configured as 11.