DELL PC6224F User Manual
Command Groups
125
Denial of Service
Command
Description
Mode*
dos-control firstfrag
Enables Minimum TCP Header Size Denial of
Service protection.
GC
dos-control icmp
Enables Maximum ICMP Packet Size Denial of
Service protections.
GC
dos-control l4port
Enables L4 Port Denial of Service protection.
GC
dos-control sipdip
Enables Source IP Address = Destination IP
Address (SIP=DIP) Denial of Service
protection.
GC
dos-control tcpflag
Enables TCP Flag Denial of Service
protections.
GC
dos-control tcpfrag
Enables TCP Fragment Denial of Service
protection.
GC
ip icmp echo-reply
Enables or disables the generation of ICMP
Echo Reply messages.
GC
ip icmp error-interval
Limits the rate at which IPv4 ICMP error
messages are sent.
GC
ip icmp unreachables
Enables the generation of ICMP Destination
Unreachable messages.
IC
ip icmp redirects
Enables the generation of ICMP Redirect
messages.
IC
ipv6 icmp error-internal
Limits the rate at which ICMPv6 error messages
are sent.
GC
ipv6 unreachables
Enables the generation of ICMPv6 Destination
Unreachable messages.
IC
show dos-control
Displays Denial of Service configuration
information.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.