DELL PC6224F User Manual

System Management Commands

•

value — The priority of one backup switch over another. (Range: 0–12)

The switch priority defaults to the hardware management preference value of 

1.

Global Configuration mode

Switches that do not have the hardware capability to become the 

Management Switch are not eligible for management.
Once the priority of a switch has been configured, it cannot be reset to the 

default. Switch priority is not affected by the "clear config" command.

The following example displays how to configure switch number “1” to have a 

priority of “2” for becoming the Management Switch.

console(config)#switch 1 priority 2

Use the switch renumber command in Global Configuration mode to change 

the identifier for a switch in the stack. Upon execution, the switch is 

configured with the configuration information for the new switch, if any is 

available. The old switch configuration information is retained; however, the 

old switch will be 

operationally unplugged.

switch 

oldunit renumber newunit

•

oldunit — The current switch identifier. (Range: 1–12)

•

newunit — The updated value of the switch identifier. (Range: 1–12)

Global Configuration mode