DELL PC6224F User Manual

ACL Commands

This command has no default configuration.

Mac-Access-List Configuration mode

The no form of this command is not supported, as the rules within an ACL 

cannot be deleted individually. Rather the entire ACL must be deleted and 

respecified.
The assign-queue and redirect parameters are only valid for permit 

commands.

The following example configures a MAC ACL to deny traffic from MAC 

address 0806.c200.0000.

console(config)#mac access-list extended DELL123

console(config-mac-access-list)#deny 0806.c200.0000 

ffff.ffff.ffff any

Use the ip access-group or no ip access-group command to apply/disable an 

IP based egress ACL on an Ethernet interface or a group of interfaces. An IP 

based ACL should have been created by the access-list <

name> … 

command with the same name specified in this command. 

ip access-group 

name direction seqnum

•

name — Access list name. (Range: Valid IP access-list name up to 31 

characters in length)

•

direction — Direction of the ACL. (Range: In or out. Default is in.)