DELL PC6224F User Manual

CDP Interoperability Commands

The show isdp neighbors command displays the list of neighboring devices.

show isdp neighbors {ethernet 

interface | detail}

•

interface — Specifies a valid interface. The full syntax is unit/port.

• detail — Show detailed information about the neighbors.

There is no default configuration for this command.

Privileged EXEC mode

There are no user guidelines for this command.

console#show isdp neighbors

Capability Codes: R - Router, T - Trans Bridge, B - Source 

Route,

                  S - Switch, H - Host, I - IGMP, r - Repeater

Device ID            Intf  Hold Cap.    Platform          Port 

ID

-------------------- ----- ---- ------- ----------------- -

-------------------

Switch               1/g1  165  RI      cisco WS-C4948    

GigabitEthernet1/1