DELL PC6224F User Manual

IGMP Snooping Commands

ip igmp snooping fast-leave 

vlan-id

•

vlan id — Number assigned to the VLAN.

IGMP snooping fast-leave mode is disabled on VLANs by default.

VLAN Configuration mode

This command has no user guidelines.

The following example enables IGMP snooping fast-leave mode on VLAN 2.

console(config-vlan)#ip igmp snooping fast-leave 2

This command sets the IGMP Group Membership Interval time on a VLAN. 

The Group Membership Interval time is the amount of time in seconds that a 

switch waits for a report from a particular group on a particular interface 

before deleting the interface from the entry. This value must be greater than 

the IGMPv3 Maximum Response time value. The range is 2 to 3600 seconds. 

The no form of this command sets the IGMPv3 Group Membership Interval 

time to the default value.

ip igmp snooping groupmembership-interval 

vlan-id seconds

•

vlan-id  — Number assigned to the VLAN

• seconds — IGMP group membership interval time in seconds. (Range: 

2–3600)