DELL PC6224F User Manual

VLAN Commands

This command has no default configuration.

Privileged EXEC mode

This command has no user guidelines.

The following example displays detailed information for unit/port "1/g1."

console#show dvlan-tunnel interface 1/g1

Interface

Mode

EtherType

---------

------- --------------

1/g1

Enable

vMAN

The following table describes the significant fields shown in the example.

Use the show interfaces switchport command in Privileged EXEC mode to 

display switchport configuration.

Mode

This field specifies the administrative mode through which 

Double VLAN Tunneling can be enabled or disabled. The default 

value for this field is 

disabled

.

Interface

Interface Number.

EtherType

This field represents a 2-byte hex EtherType to be used as the first 

16 bits of the DVLAN tunnel. The three different EtherType tags 

are: (1) 802.1Q, which represents the commonly used value of 

0x8100. (2) vMAN, which represents the commonly used value of 

0x88A8. (3) If EtherType is not one of these two values, it is a 

custom tunnel value, representing any value in the range of 0 to 

65535.