DELL PC6224F User Manual

802.1x Commands

The following command sets the number of seconds that the switch waits for 

a response to an EAP-request/identity frame to 3600 seconds.

console(config)# interface ethernet 1/g16

console(config-if-1/g16)# dot1x timeout tx-period 

3600

Use the show dot1x command in Privileged EXEC mode to display 802.1X 

status for the switch or for the specified interface. This feature is an extension 

of Dot1x Option 81 feature added in Power Connect Release 2.1. The feature 

accepts a VLAN name as an alternative to a number when RADIUS indicates 

the Tunnel-Private-Group-ID for a supplicant.

show dot1x [ethernet

interface]

•

interface — A valid Ethernet interface.

This command has no default configuration.

Privileged EXEC mode

This command has no user guidelines.

The following example displays 802.1X port 1/g8 status.

console#show dot1x ethernet 1/g8

Administrative Mode............... Disabled