DELL PC6224F User Manual

802.1x Commands

The following example set the unauthenticated VLAN on port 1/g2 to VLAN 

20.

console(config-if-1/g2)#dot1x unauth-vlan 20

Use the show dot1x advanced command in Privileged EXEC mode to display 

802.1x advanced features for the switch or for the specified interface. The 

output of this command has been updated in release 2.1 to remove the 

Multiple Hosts column and add an Unauthenticated VLAN column, which 

indicates whether an unauthenticated VLAN is configured on a port. The 

command has also been updated to show the Guest VLAN ID (instead of the 

status) since it is now configurable per port.

show dot1x advanced [ethernet

interface]

•

interface — Specifies a valid ethernet interface.

This command has no default configuration.

Privileged EXEC mode

This command has no user guidelines.