DELL PC6224F User Manual

IP Routing Commands

Disabled is the default configuration.

Interface Configuration (VLAN) mode

This command has no user guidelines.

The following example defines the IP address and subnet mask for VLAN 15.

console(config)#interface vlan 15

console(config-if-vlan15)#ip netdirbcast

Use the ip route command in Global Configuration mode to configure a 

static route. Use the no form of the command to delete the static route. The 

IP route command sets a value for the route preference. Among routes to the 

same destination, the route with the lowest preference value is the route 

entered into the forwarding database. Specifying the preference of a static 

route controls whether a static route is more or less preferred than routes from 

dynamic routing protocols. The preference also controls whether a static 

route is more or less preferred than other static routes to the same 

destination.

ip route 

ip addr {subnetmask | prefix length} nextHopRtr [preference]

no ip route 

ip addr {subnetmask | prefix length} nextHopRtr [preference]

•

ip-address — IP address of destination interface.

•

subnet-mask — Subnet mask of destination interface.