DELL PC6224F User Manual

IP Routing Commands

Use this command to globally enable IPv4 routing.

console(config)#ip routing

Use the routing command in Interface Configuration mode to enable IPv4 

and IPv6 routing for an interface. View the current value for this function 

with the show ip brief command. The value is labeled Routing Mode in the 

output display. Use the no form of the command to disable routing for an 

interface.

Disabled is the default configuration.

Interface Configuration (VLAN) mode

This command has no user guidelines.

The following example enables IPv4 and IPv6 routing for VLAN 15

console(config)#interface vlan 15

console(config-if-vlan15)#routing