DELL PC6224F User Manual
744
IPv6 MLD Snooping Commands
interface because it did not receive a report for a particular group in that
interface. This value must be less than the MLD Query Interval time value.
The range is 1 to 3599 seconds.
Syntax
ipv6 mld snooping maxresponse [vlan-id] [seconds]
no ipv6 mld snooping maxresponse [vlan-id]
no ipv6 mld snooping maxresponse [vlan-id]
• vlan_id — Specifies a VLAN ID value in VLAN Database mode.
•
•
seconds — MLD maximum response time in seconds. (Range: 1–3599)
Default Configuration
The default maximum response time is 10 seconds.
Command Mode
Interface Configuration mode.
VLAN Database mode.
VLAN Database mode.
User Guidelines
This command has no user guidelines.
Example
console(config-if-4/g1)#ipv6 mld snooping maxresponse
33
ipv6 mld snooping mcrtexpiretime
The ipv6 mld snooping mcrtexpiretime command sets the Multicast Router
Present Expiration time. The time is set for a particular interface or VLAN.
This is the amount of time in seconds that a switch waits for a query to be
received on an interface before the interface is removed from the list of
interfaces with multicast routers attached. The range is 1 to 3600 seconds.
Syntax
ipv6 mld snooping mcrtexpiretime [
vlan-id] [seconds]