DELL PC6224F User Manual

IPv6 Multicast Commands

console(config-if-vlan3)#ipv6 pimsm join-prune-

interval 90

Use the ipv6 pimsm register-threshold command to configure the Register 

Threshold rate for the RP router to switch to the shortest path. Use the "no" 

form of this command to set the register threshold rate to the default.

ipv6 pimsm register-threshold 

threshold

• threshold—The threshold rate (Range: 0–2000 Kbps).

The default threshold rate is 0.

Global Configuration mode

There are no user guidelines for this command.

console(config)#ipv6 pimsm register-threshold 250

Use the ipv6 pimsm rp-address command to statically configure the RP 

address for one or more multicast groups. The optional keyword override 

indicates that if there is a conflict, the RP configured with this command 

prevails over the RP learned by BSR. Use the "no" form of this command to 

remove the RP address for one or more multicast groups.