DELL PC6224F User Manual

IPv6 Routing Commands

•

prefix — Consists of the bits of the address to be configured.

•

prefix-length — Designates how many of the high-order contiguous bits of 

the address make up the prefix.

•

eui64 — The optional eui-64 field designates that IPv6 processing on the 

interfaces is enabled using an EUI-64 interface ID in the low order 64 bits 

of the address. If this option is used, the value of 

prefix_length must be 64 

bits. 

This command has no default configuration.

Interface Configuration (VLAN, Tunnel, Loopback) mode.

This command has no user guidelines.

The following example configures an IPv6 address and enables IPv6 

processing.

console(config)#interface vlan 15

console(config-if-vlan15)#ipv6 address 2020:1::1/64

Use the ipv6 enable command in Interface Configuration mode to enable 

IPv6 routing on an interface (including tunnel and loopback interfaces) that 

has not been configured with an explicit IPv6 address. Command execution 

automatically configures the interface with a link-local address. The 

command is not required if an IPv6 global address is configured on the 

interface.