DELL PC6224F User Manual

IPv6 Routing Commands

This command has no user guidelines.

The following example sets at 10 the number of duplicate address detection 

probes transmitted while doing neighbor discovery.

console(config)#interface vlan 15

console(config-if-vlan15)#ipv6 nd dad attempts 10

Use the ipv6 nd managed-config-flag command in Interface Configuration 

mode to set the “managed address configuration” flag in router 

advertisements. When the value is true,
end nodes use DHCPv6. When the value is false, end nodes automatically 

configure addresses.

False is the default configuration.

Interface Configuration (VLAN, Tunnel, Loopback) mode

This command has no user guidelines.