DELL PC6224F User Manual

IPv6 Routing Commands

Router Advertisement Suppress Flag............. Disabled

Prefix 3FF0:1236:C261::1/64

Preferred Lifetime............................. 10000

Valid Lifetime................................. 100000

Onlink Flag.................................... Enabled

Autonomous Flag................................ Enabled

console#show ipv6 interface brief

           Oper.

Interface  Mode      IPv6 Address/Length

---------- -------- ---------------------------------

vlan3      Enabled  FE80::2FC:E3FF:FE90:147/128

                    3FF0:1236:C261::1/64

loopback 1 Enabled  FE80::2FC:E3FF:FE90:145/128

                    3FF0:C221:1234::1/64

loopback 2 Disabled

tunnel 1   Disabled 3FFE:1234::1/64                     [TENT]

The show ipv6 mld groups command is used to display information about 

multicast groups that MLD reported. The information is displayed only when 

MLD is enabled on at least one interface. If MLD was not enabled on any 

interfaces, there is no group information to be displayed.

show ipv6 mld groups {

group-address | vlan vlan-id}

•

group-address — The group address to display.

•

vlan-id — A valid VLAN id.