DELL PC6224F User Manual
86
Command Groups
Spanning Tree
radius-server deadtime
Improves RADIUS response times when servers
are unavailable. Causes the unavailable servers
to be skipped.
GC
radius-server host
Specifies a RADIUS server host.
GC
radius-server key
Sets the authentication and encryption key for
all RADIUS communications between the
switch and the RADIUS daemon.
GC
radius-server retransmit
Specifies the number of times the software
searches the list of RADIUS server hosts.
GC
radius-server source-ip
Specifies the source IP address used for
communication with RADIUS servers.
GC
radius-server timeout
Sets the interval for which a switch waits for a
server host to reply
GC
retransmit
Specifies the number of times the software
searches the list of RADIUS server hosts before
stopping the search.
R
show radius-servers
Displays the RADIUS server settings.
PE
show radius-servers
statistics
Shows the statistics for an authentication or
accounting server.
PE
source-ip
Specifies the source IP address to be used for
communication with RADIUS servers.
R
timeout
Sets the timeout value in seconds for the
designated radius server.
R
usage
Specifies the usage type of the server.
R
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command
Description
Mode*
clear spanning-tree
detected-protocols
Restarts the protocol migration process on all
interfaces or on the specified interface.
PE
exit (mst)
Exits the MST configuration mode and applies
configuration changes.
MC
Command
Description
Mode*