DELL PC6224F User Manual

OSPF Commands

Use the enable command in Router OSPF Configuration mode to reset the 

default administrative mode of OSPF in the router (active). Use the no form 

of the command to disable the administrative mode for OSPF.

Enabled is the default configuration.

Router OSPF Configuration mode.

This command has no user guidelines.

The following example enables OSPF router mode.

console(config-router)#enable

Use the exit-overflow-interval command in Router OSPF Configuration 

mode to configure the exit overflow interval for OSPF. When a router leaves 

the overflow state it can originate non-default AS-external-LSAs. When set to 

0, the router will not leave Overflow State until restarted. Use the no form of 

the command to return the interval to the default value.

seconds