DELL PC6224F User Manual
918
OSPF Commands
show ip ospf range
Use the show ip ospf range command in Privileged EXEC mode to display
information about the area ranges for the specified area-id.
Syntax
show ip ospf range
area-id
•
area-id — Identifies the OSPF area whose ranges are being displayed.
(Range: IP address or decimal from 0–4294967295)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the area ranges for the
specified area-id.
console#show ip ospf range 20
Area ID
IP Address
Subnet Mask
Lsdb Type
Advertisement
-------
----------
---------
---------
-------------
0.0.0.20 192.168.6.0 255.255.255.0 Summary Link Enabled
show ip ospf statistics
This command displays information about recent Shortest Path First (SPF)
calculations. The SPF is the OSPF routing table calculation. The output lists
the number of times the SPF has run for each OSPF area. A table follows this
information. For each of the 15 most recent SPF runs, the table lists how long
ago the SPF ran, how long the SPF took, and the reasons why the SPF was
scheduled.