DELL PC6224F User Manual
OSPFv3 Commands
935
Example
The following example creates an area range for the area 1 NSSA.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 range 2020:1::1/64
summarylink
area stub
Use the area stub command in Router OSPFv3 Configuration mode to create
a stub area for the specified area ID. A stub area is characterized by the fact
that AS External LSAs are not propagated into the area. Removing AS
External LSAs and Summary LSAs can significantly reduce the link state
database of routers within the stub area.
Syntax
area
areaid stub
no area
areaid stub
•
areaid — Valid OSPFv3 area identifier.
Default Configuration
This command has no default configuration.
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example creates a stub area for area 1.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 stub